Air-Cooled Mining Farm — 2 to 10 MW in 40 ft Containers

Air-Cooled Mining Farm — 2 to 10 MW in 40 ft Containers

Categories:

A 2–10 MW air-cooled mining farm in 40 ft containers: six to forty boxes at 180 kW each, with the substation, distribution and site layout quoted as one system.

2–10 MWsite capacity
6–40containers
180 kWper box
8–12 weeksto energise
01 / OVERVIEW

What it is for

A farm is not a container order. It is a power study, a heat study and a yard layout that have to agree with each other before the first box is welded. Most projects that go wrong went wrong here: containers bought one at a time, then a substation sized for half of them, then a summer that the fans could not get through.

We quote the whole site — containers, substation skid, distribution and the dry site layout — against one design ambient and one electricity price. If the numbers say air cooling will derate in July, we say so before you sign rather than after the first bill.

What you still own is the civil work: the pad, the fence, the utility connection and the fuel or PV if you are off-grid. We draw what those have to look like, and we do not pretend they are included.

Where it is typically used

Hydro-heavy regionsQuebec, Iceland, Siberia, the Nordic grid — cheap power, cold air, no water stress.
Desert and steppe sitesWhere a water curtain is possible but a cooling tower is not, air remains the only route.
Rented landContainers that can be lifted out in a week if the PPA or the landlord changes.
Staged build-outStart at 2 MW, add boxes as the machines arrive and the grid allows.
02 / SPECIFICATIONS

Key specifications

Site capacity 2–10 MW, in stages of 180 kW
Containers 6–40 × 40 ft air-cooled, 336 machines each
Electrical MV ring at 10 or 35 kV, 1.25–2.5 MVA per substation skid
Heat rejection On-box fans, water curtain, no central plant
Design ambient −25 °C to +45 °C, stated in the contract
Footprint About 1,150 m² for 10 MW with 4 m aisles
Noise 68–72 dB(A) at 10 m, fence line to be planned
Control One dashboard, per-container and per-position
Build time 30–45 days per box, 8–12 weeks to energise a site
Shipping 1 × 40HC per box, flat rack not required
Foundation Compacted gravel or concrete strip, 150 mm tolerance
Standard CSC shell, IEC or UL electrical to destination

Figures are for the standard configuration and change with the project. Values are design values; acceptance follows the contract technical agreement.

03 / WHAT IS INSIDE

What goes in the box

Installed, wired and tested before dispatch. On site the work is placement and external connections.

01Containers

The boxes themselves, built to your machine count and ambient, tested with resistive load before dispatch.

02Substation skid

Transformer, MV switchgear and paralleling for the whole farm, sized on the final stage rather than the first.

03Distribution

LV feeders from the substation to each container, plus per-position breakers inside.

04Layout drawing

Pad, fence, aisle, cable trench and exhaust separation, issued as a site plan.

05Commissioning

One engineer for ten days on site, or remote support if you have your own electricians.

06Spares

Fan motors, belts, PDU strips and breakers, one set per ten containers.

04 / MODELS

Which model to take

Stage Containers Load Substation Footprint
Stage 1 6 1.1 MW 1 × 1.25 MVA ≈ 320 m²
Stage 2 12 2.2 MW 1 × 2.5 MVA ≈ 620 m²
Stage 3 24 4.3 MW 2 × 2.5 MVA ≈ 1,150 m²
Stage 4 40 7.2 MW 3 × 2.5 MVA ≈ 1,800 m²

Standard models are listed. Other capacities are built to order, with two to three weeks added to the standard lead time.

05 / TECHNICAL NOTES

Why a farm is sized on the substation, not on the containers

ENGINEERING NOTE

The container is the flexible part

A 40 ft air-cooled box can be added in a month. A 2.5 MVA transformer cannot — lead times on MV equipment ran to 30–50 weeks through 2023 and 2024 and have not fully recovered. Farms that ordered containers first and transformers second spent a winter with boxes on the ground.

So we usually size the substation for the stage you intend to reach, and buy the containers stage by stage. It costs more upfront and it is the only way the site actually energises on schedule.

Aisle width is a money decision

Four metres between rows lets a telehandler pass and lets hot air clear. Three metres saves about 12% of the pad and costs you service access for the next five years. We draw four unless the site is genuinely tight.

Layout and single-line diagram are issued before the first container is released to production. Nothing is cut before both are signed.

06 / SELECTION

When to use it, when not to

These come from projects rather than general advice. Match your case against them; it is more useful than reading the specification table.

You have 2 MW or more and a site you control for at least three years.

A farm quoted as one system is cheaper per megawatt than boxes bought separately, and it is the only way the substation arrives on time.

You are building in stages and want the design to survive all of them.

We size the MV side for the final stage so stage 2 does not mean a second transformer.

You need 300 kW for a workshop and a handful of machines.

One 20 ft container and a wall-mounted panel is the honest answer; a farm design would be padding.

The site has no water and the ambient peaks above 40 °C for weeks.

Air cooling will derate exactly when power is most expensive. Take the water-cooled farm instead.

The land lease is shorter than the payback.

Containers move; a substation, a pad and a fence do not.

07 / DELIVERY

From contract to energisation

Site data

Ambient, altitude, voltage, water availability, lease term. One call, usually.

Scheme

Layout, single-line diagram and stage plan in 5–7 working days.

Contract

Drawing release, deposit, and the transformer order goes out first.

Production

30–45 days per container, staged so boxes arrive as the pad is finished.

Energise

Commissioning, load test per box, handover of the label and cable schedule.

08 / GALLERY

On site and in detail

Containers staged in the yard before dispatch
Containers staged in the yard before dispatch
Site arrangement with service aisles between rows
Site arrangement with service aisles between rows
Machine rows inside a 40 ft air-cooled box
Machine rows inside a 40 ft air-cooled box
Distribution cabinet with one breaker per position
Distribution cabinet with one breaker per position

Some images are scheme illustrations and renders showing structure and layout. Final delivery follows the contract drawings.

09 / FAQ

What customers ask most

Can you supply containers only and we do the rest?

Yes, and a good number of customers do. You get the same box, the layout drawing and the cable schedule, and you buy the transformer locally. We will still ask what you are buying, because a 1,000 kVA unit for six boxes will not carry them.

What happens if we add machines later?

The electrical design has spare ways and the pad has spare bays. Adding a box is a month; adding a transformer is a year, which is why the MV side is sized first.

Is 10 MW realistic on one site?

Yes, at 40 containers, but the grid connection becomes the project. At that size the utility study usually sets the schedule, not us.

Do you handle the civil work?

We issue the pad, trench and fence drawings and we can supervise. We do not pour concrete outside China.

How do you prove 180 kW per box?

Resistive load bank at full rating for four hours, per box, with the ambient recorded. You get the test sheet with the unit.

Ask for a scheme for your site

Send the capacity, rack count, site conditions and local climate. You get a layout, a single-line diagram and a price, at no charge, revised until it works.

See the mining range

Product Details
gallery
RELATED PRODUCT
A dry cooler heat rejection skid with axial fans
Heat Rejection Skid — 300 to 1,500 kW of Dry Cooling
Water-cooled mining containers in a row along a street
Water-Cooled Mining Farm — 2 to 10 MW with a Shared Heat Rejection Loop
20 ft mining container with doors open (catalogue crop)
40HC Air-Cooled Mining Container — 336 Machines at 180 kW
A 40-foot water-cooled mining container outdoors at dusk
40HC Water-Cooled Mining Container — 210 S21 Hydro Units at 1.2 MW
Contact us

Committed to providing customers with high-quality and reliable container solutions.