WCS4011 — 40 ft Expandable Container House, Single Wing

WCS4011 — 40 ft Expandable Container House, Single Wing

A 40 ft single-wing unit: 58 m² at 4,900 mm open width instead of 6,454 mm, so it fits a 5 m plot or a boundary. One roof joint instead of two.

58 m²floor when open
4,900 mmopen width
2,228 mmfolded
1per 40HQ
01 / OVERVIEW

What it is for

A double-wing 40 ft opens to 6,454 mm, which needs 6.5 m of clear ground and a pad that is level across it. On a narrow plot, a row of units along a boundary, or a site where the crane cannot reach the far side, that 6.5 m is the problem.

A single-wing 40 ft opens one side only: 4,900 mm wide, 12 m long, 58 m². It is narrower, it needs less clearance, and it can be set against a fence or another unit on the closed side without blocking anything.

The WCS4011 is that unit. It is the layout for constrained plots and for rows, and it is the one we specify when the customer sends a site plan and the site plan says 5 m.

Where it is typically used

Narrow plots and boundary sitesOpens away from the fence, 4.9 m of clear width instead of 6.5 m.
Rows and terracesClosed side against the neighbour, wing facing the walkway.
Sites with restricted crane accessOne wing means one lift position and less reach.
Long buildingsUnits placed end to end make a 24 m or 36 m block with one continuous elevation.
02 / SPECIFICATIONS

Key specifications

Folded size 12,000 × 2,228 × 2,504 mm
Open size 12,000 × 4,900 × 2,504 mm
Floor area 58 m² / 624 ft² internal when open
Layout 2 bedrooms or 1 bedroom + living, bathroom, kitchen
Structure Galvanised frame, one folding wing, aluminium wall frame
Walls 50 mm PU panel; 75 mm for permanent use
Roof One locking bar over the single joint, 2% fall to the closed side
Floor 18 mm cement board, one sealed centre joint, 1.5 mm vinyl
Glazing Double-glazed on the closed elevation and the wing
Electrical RCBO board, 12 twin sockets, 3 AC circuits, 8 data points
Loading 1 unit per 40HQ
Weight Approx. 5.6 t as shipped

Figures are for the standard configuration and change with the project. Values are design values; acceptance follows the contract technical agreement.

03 / WHAT IS INSIDE

What goes in the box

Installed, wired and tested before dispatch. On site the work is placement and external connections.

01Single wing

One 3,000 mm panel set on one long side only; the other side is a fixed wall.

02Closed wall

A fixed elevation that can sit against a boundary, with high-level windows only.

03Fixed core

Bathroom and kitchen in the centre, as on the double-wing, but shifted to the closed side.

04Roof joint

One locking bar with a drip edge, set to fall away from the wing side.

05Floor

One folding panel, one seam, one trim cover — half the joint maintenance of a double wing.

06Anchoring

Four anchors on the closed side, because the open side has less mass over the pad.

04 / MODELS

Which model to take

Model Open area Width Layout Best for
WCS4011-2B 58 m² 4,900 mm 2 bed, shared bath Narrow plots, rows
WCS4011-1B 58 m² 4,900 mm 1 bed + living Boundary sites, terraces
WCS4011-R 58 m² 4,900 mm Row, 2 keys Motel rows, staff terraces
WCS4011-O 58 m² 4,900 mm Open plan + WC Site office, canteen

Standard models are listed. Other capacities are built to order, with two to three weeks added to the standard lead time.

05 / TECHNICAL NOTES

Half the joints, half the maintenance

ENGINEERING NOTE

One roof joint is a real advantage

Every roof joint is a line that has to be inspected at every opening and re-sealed every second cycle. A double wing has two; a single wing has one, on the side that opens.

On a unit that opens and closes twice a year — a seasonal cabin, a stand at a fair — that halves the maintenance. On a unit that opens once and stays, it does not matter much, and then the argument is clearance rather than upkeep.

The closed wall is a design constraint, not a blank

The fixed elevation cannot have big windows if it is going against a boundary, so light has to come from the wing and the two ends. That is why the single-wing plan puts the living space at the open end and the bedrooms at the closed end.

If the unit is free-standing and the closed side faces a view, tell us — the wall can be glazed instead, and the plan flips.

A single wing is not just a narrower double wing. It has one seam instead of two, and that changes the upkeep.

06 / SELECTION

When to use it, when not to

These come from projects rather than general advice. Match your case against them; it is more useful than reading the specification table.

The site plan says 5 m, not 6.5 m.

4,900 mm open width is the whole reason for the product.

The unit sits against a fence or another unit.

The closed wall takes high-level windows only.

It opens and closes every season.

One roof joint instead of two, halving the seal maintenance.

You need 77 m².

The double wing is the only way to get it from a 40 ft footprint.

You want glazing on both long elevations.

Both walls are load paths here; only one opens.

07 / DELIVERY

From contract to the first opening

Brief

Site plan, clearance on each side, orientation, who is living in it. Layout in 48 hours.

Drawing

Plan, the open-side elevation, the anchoring plan and the pad drawing, signed before production.

Production

32 days for the shell; 40 with kitchen and bathroom.

Test

Open-and-close cycles, water test on the single roof joint, circuit test, plumbing pressure test.

Packing

Folded and banded, with the wing protected and the seal kit crated on the chassis.

Opening

Four to five hours with four people.

08 / GALLERY

On site and in detail

A 40 ft single-wing opened on gravel, wing facing the camera and the closed wall behind
A 40 ft single-wing opened on gravel, wing facing the camera and the closed wall behind
The closed elevation, with high-level windows and no opening panels
The closed elevation, with high-level windows and no opening panels
Interior after opening, with the living space at the wing end
Interior after opening, with the living space at the wing end

Some images are scheme illustrations and renders showing structure and layout. Final delivery follows the contract drawings.

09 / FAQ

What customers ask most

How much clearance does it need?

4,900 mm of open width plus about 1 m of working space on the wing side, so 6 m of clear ground. The closed side can sit 300 mm from a fence, which is what makes it work on a boundary.

Can the closed wall be glazed?

Yes, if the unit is free-standing and there is a view. It changes the bracing detail and it has to be on the drawing, not decided on site.

Is it cheaper than the double wing?

Slightly, because there is less hinge hardware and one less roof joint. The freight is the same, so the saving is in the unit and in the maintenance, not in the shipping.

Can two units be placed side by side?

Yes, closed walls together, wings facing out. That gives a 116 m² building 9.8 m wide with two open elevations and one shared service wall.

What foundation does it need?

Eight bearing points, and the closed side carries more load than the open side, so the anchoring plan is asymmetric. That plan comes with the drawing.

Ask for a layout for your site

Send the site, the headcount, the ground conditions and the climate. You get a floor plan, a fold sequence and a price, at no charge, revised until it works.

See the full expandable range

Product Details
gallery
RELATED PRODUCT
Card Exp Exp30
WCE3011 — 30 ft Expandable Container House, 58 m²
20 ft expandable container house with the side section open, standing on a grass pitch
WCR2011 — 20 ft Expandable Container House, One Bedroom
20 ft expandable container shop with orange awnings open onto a street
WCB2011 — 20 ft Expandable Container Shop and Retail Unit
Double-wide expandable cafe with canopy (catalogue crop)
WCB4021 — 40 ft Expandable Café, Bar and Retail Unit
Contact us

Committed to providing customers with high-quality and reliable container solutions.