An expandable container sample standing in a yard in Los Angeles

Project case · Sample unit · Los Angeles, USA

A sample unit in Los Angeles that changed the second order

The buyer had drawings, a price and a container full of questions he could not answer from a PDF. We sent one unit. He walked through it for two hours, moved a door, deleted a wardrobe, and ordered the rest.

1sample unit
2 hourson site with the buyer
3changes to the spec
1 weekto re-issue the drawing
ClientPrivate buyer and reseller (not named)
LocationLos Angeles, California, United States
ScopeOne 20 ft expandable sample unit, fully fitted
ContractSample build, shipping, yard handling, spec revision
OutcomeSample retained by the buyer; production order revised from it
01 / The brief

A drawing cannot answer a question about a doorway

The problem with a PDF

The buyer was reselling into a market where his customers had never seen this product either. He could quote a price. What he could not do was stand in a room and say whether a bed fits beside that door.

Every question he had was spatial: the swing, the ceiling height under the fold, how much floor you actually get once the joinery is in. None of it survives being described.

What one unit did

The unit shipped folded, was lifted off with a forklift in the yard and opened on the spot. He spent two hours in it, then gave us three changes: the entry door moved to the long side, one wardrobe removed, and the bathroom pod turned ninety degrees.

All three were cheap at that stage and expensive later. That is the whole argument for a sample.

02 / What we delivered

What the visit changed

Moving it is part of the product
01 / HandleMoving it is part of the product

A forklift, two pallets and a flat yard. If a unit needs a crane to be moved around a dealership, it is not a product the dealer can sell.

Open in the yard, not on a site
02 / OpenOpen in the yard, not on a site

The unit was opened where the buyer could walk round it, with the door swung and the interior visible from outside.

One unit, one trailer
03 / DeliverOne unit, one trailer

The sample went out as a single lift on a flatbed, strapped and sheeted. At the other end it needs a forklift, not a crane, which is what makes it a sample a dealer can actually show.

03 / Sequence

Sample to production

Step 1Agree the sample specStandard unit, one finish, no bespoke items, so it could ship in weeks.
Step 2Build and fit outFully finished in the factory including bathroom pod and kitchenette.
Step 3Ship foldedOne unit as a single lift, delivered to the buyer’s yard.
Step 4Walk-throughBuyer and his client spent two hours in the unit and marked up changes.
Step 5Re-issueDrawing revised, sample retained, production order released against the new spec.
04 / By the numbers

What a sample costs and what it saves

1unit built as the sample
3spec changes from the walk-through
0changes after production started
1 weekdrawing turnaround

The sample was retained by the buyer as a display unit. Commercial values are not disclosed.

05 / Site record

The sample, in and out

The unit loaded on a flatbed before delivery to the yard
The unit loaded on a flatbed before delivery to the yard
The finished sample back in the yard, ready to be shown
The finished sample back in the yard, ready to be shown
Lifted clear by forklift for positioning in the yard
Lifted clear by forklift for positioning in the yard
Figures & disclosure

Photographs are from the delivered project. The client is not named. Commercial values are withheld; the figures describe the configuration as shipped.

If you are reselling these, start with one unit.

Tell us the market you are selling into and the finish you want to show. We will build a sample that ships folded, and revise the production drawing from what your buyers say when they stand inside it.

Talk to an engineer

Contact us

Committed to providing customers with high-quality and reliable container solutions.

ACTBOXES Whatsapp