A white equipment enclosure in a workshop, its long side made of framed doors and louvre panels

Project case · Equipment enclosure · Side access

Doors Down the Side Instead of One at the End

An enclosure where the long side is a run of framed openings — solid leaves, louvre leaves — each with its own welded frame and gasket. Built and fitted indoors, photographed with the panels open and the box still empty.

Sideaccess, panel by panel
Louvreand solid leaves
Chequerplate floor
0windows
ClientEquipment manufacturer (not named)
LocationChina, workshop photographs
ScopeWhite enclosure: side openings with individual frames, louvre and solid leaves, chequer plate floor, ceiling grille, painted inside and out
ContractShell, door and louvre fabrication, lining, paint, fit-out support
SiteFabrication shop; the box was built and fitted out under cover
01 / The brief

Why the side and not the end

Equipment is serviced from the front, not the end

Put one door in the end wall and everything inside has to be arranged along a single axis, with a clear lane down the middle for a person carrying a panel. Put the doors down the side and every bay gets its own access, and the floor plan stops being a corridor.

The cost is in the frame. Every opening needs its own welded frame tied back to the posts and the floor rail, and every leaf needs a gasket that actually compresses. A 2 mm sheet skin will not carry a door on four self-tappers, whatever the drawing says.

Two kinds of leaf, one frame size

Solid leaves where a person or a panel has to pass. Louvre leaves where the bay behind it needs air. Both are built to the same opening, so a louvre leaf can be swapped for a solid one later without touching the shell.

The louvres are fixed, not adjustable. An adjustable louvre is a thing that gets left in the wrong position and then blamed on the enclosure.

02 / What we delivered

Open, then closed

The side, panel by panel
01 / LayoutThe side, panel by panel

Each opening has its own frame, welded and sealed before paint. With the leaves open the whole side reads as one long opening, which is exactly what the fit-out crew wants.

Empty, floored, ready
02 / InsideEmpty, floored, ready

Chequer plate floor, sealed at the edges, a ceiling grille for air, walls painted. Nothing is fitted until the shell is closed up, water-tested and painted.

Lock bars, not latches
03 / HardwareLock bars, not latches

Leaves carry container-style bars and hinges, the same hardware as the end doors, because the people closing them will treat them like container doors.

03 / Sequence

How it went together

Step 1Bay planOpening positions set from the equipment layout, one per bay.
Step 2Cut and frameOpenings cut, frames welded to posts and floor rail, corners sealed.
Step 3LeavesSolid and louvre leaves fabricated to one opening size, gaskets fitted.
Step 4PaintShell and leaves painted inside and out before any fitting went in.
Step 5Fit-outClosed up, water-tested, then handed over for the electrical fit-out.
04 / By the numbers

The shell, in four numbers

2kinds of leaf: solid and louvre
1welded frame per opening
0windows
0self-tappers holding a door

Counted from the build and the door schedule. Commercial values are not disclosed.

05 / Site record

In the workshop, panels open

The whole side open at once, before the fit-out
The whole side open at once, before the fit-out
From inside: the same leaves, seen from the floor
From inside: the same leaves, seen from the floor
Floor in, walls painted, nothing fitted yet
Floor in, walls painted, nothing fitted yet
Figures & disclosure

Photographs are from the delivered project. The client is not named and the site is not disclosed. Commercial values are withheld; the figures describe the build as shipped.

Start from the bays, not the elevation.

Tell us how many access points the equipment needs and where they sit, and the side of the box stops being a wall and becomes a schedule.

Talk to an engineer

Contact us

Committed to providing customers with high-quality and reliable container solutions.

ACTBOXES Whatsapp