A blue 40 ft equipment container with two bands of louvre above a solid skirt, standing in a yard

Project case · Equipment enclosure · 40 ft louvre shell

A 40 ft Shell That Is Half Louvre

Two bands of fixed louvre above a solid skirt, one double door mid-wall, the same treatment carried round the end. Inside, the louvres read as louvres: no ducting, no fan wall, no plant room bolted onto the side.

40 ftshell length
2louvre bands, long side
1double access door
0windows
ClientEquipment integrator (not named)
LocationSouth China, yard photographs
Scope40 ft ventilated equipment container, louvre bands on the long side and the end wall, insulated lining, double access door
ContractShell supply, louvre fabrication, lining, coating, weather test
SiteContainer yard on a concrete apron; photographed before it went on the trailer
01 / The brief

Ventilation sized as wall area, not as an add-on

The blades do the work a fan wall would

A container has roughly 120 square metres of envelope. In a shell like this one, the louvre bands give back a large part of it as free area, and free area is what the heat load is actually sized on.

So the decision is not “how many fans”, it is “how much of the wall can be opening”. Blades set at roughly 45 degrees, facing down and out, keep the rain out of the same opening the air comes through. Anything driven at the wall hits a blade, runs to its front edge and drops off; it cannot climb from one blade to the next.

The skirt stays solid

The lower 900 mm of the long side is plain sheet. That is where cable trays, earth bars, cable glands and the mounting feet of whatever is being installed will end up, and none of them can be fixed to a blade.

It also keeps the opening above the standing water line and above the height of the forklift tines that will inevitably be driven at this box.

02 / What we delivered

Three things to look at

Blades, seen from inside
01 / LouvreBlades, seen from inside

The same leaves you see from the yard, lined through to the inside face. Light comes in at the level you are working, and the inside of the wall stays a wall: nothing protrudes into the standing space.

One double leaf, mid-wall
02 / DoorOne double leaf, mid-wall

Cut into the plain part of the wall, framed and welded to the corner post and the floor rail. Container-style lock bars, four hinges, a gasket right round. What goes in on a pallet comes through here.

Blue outside, pale inside
03 / LiningBlue outside, pale inside

Insulated lining in a light colour, joints on the ribs, floor sealed to the walls. A dark shell with a dark interior is a shell in which nobody can read a label.

03 / Sequence

How it went together

Step 1Heat loadAir paths fixed from the equipment list, not from the container module.
Step 2Louvre framesBands fabricated as frames and welded into the wall opening.
Step 3DoorOpening cut in the plain skirt, frame welded, gasket and lock bars fitted.
Step 4Lining and coatingInsulation and lining in, then the shell painted inside and out.
Step 5Yard checkWater test on the louvres and the door, then lifted out on the lugs.
04 / By the numbers

The shell, in four numbers

40 ftshell length
2louvre bands, long side
1double access door
0windows, by design

Measured from the shell. Commercial values are not disclosed.

05 / Site record

In the yard, before the trailer

From the corner: louvre band carried round the end wall
From the corner: louvre band carried round the end wall
Inside, looking down the aisle. Lining in, nothing fixed yet
Inside, looking down the aisle. Lining in, nothing fixed yet
The door end: double leaf set in the plain part of the wall
The door end: double leaf set in the plain part of the wall
Figures & disclosure

Photographs are from the delivered project. The client is not named and the site is not disclosed. Commercial values are withheld; the figures describe the build as shipped.

Send the equipment list before the drawing.

Heat load, the biggest item that has to pass through a door, and how the box gets off the truck decide more about a ventilated shell than any elevation will.

Talk to an engineer

Contact us

Committed to providing customers with high-quality and reliable container solutions.

ACTBOXES Whatsapp