Equipment for a working hospital, delivered in a container
A hospital needed imaging support equipment housed on a live campus, with the clean, stable, quiet environment the clinical setting requires and no construction site to create it.
A hospital cannot stop for a delivery
What the campus could not tolerate
Hospital equipment is sensitive to temperature, humidity and particulates, and the clinical environment around it is sensitive to noise and to disruption. A conventional construction project inside a working campus interrupts routes that patients use.
The equipment also had a delivery date that did not move. The installation had to be short, controlled and reversible if the campus layout changed.
What we built
A containerised equipment room with filtered ventilation, a constant temperature and humidity set, acoustic treatment and a sealed, cleanable interior. Equipment went in at the factory and was powered and checked there.
On site the unit was lifted onto a prepared base inside the campus, connected to power and commissioned in days. The routes stayed open and the site stayed quiet.
What the clinical setting required

Filtered supply air with a cleanable interior and sealed joints, so the space holds its condition rather than depending on the door being shut.

Temperature and humidity controlled to a band, with the equipment load included in the calculation. Medical gear does not accept a daily swing.

Acoustic treatment and isolated plant so the unit can stand near patient areas. Noise is a clinical constraint, not a comfort preference.
From equipment schedule to clinical use
What the installation had to hold
Values describe the configuration as delivered. Equipment specification and commercial terms are not disclosed.
The unit on site, and the interior it provides




The products this specification maps to
Site, scale and dates are as published for this project. Commercial values are withheld. Technical figures describe the configuration as delivered; the note above states which values are rounded.
Send the equipment schedule and the campus constraints.
Tell us the clinical environment required, the route into the site and the noise limit. We will come back with the enclosure specification and an installation sequence.