Container Showroom Pavilion — Sales Suite, Model Hall and Terrace

Container Showroom Pavilion — Sales Suite, Model Hall and Terrace

Categories:

A two-storey sales pavilion in eight modules around a double-height glazed hall, with a mezzanine and a roof terrace. 45 days from order to opening.

2storeys, 120 m²
45 dto a finished pavilion
8modules, one stair
0wet trades on site
01 / OVERVIEW

What it is for

A sales pavilion has a hard job: it has to look like the building it is selling, open before that building exists, and come down or move on when the last unit is sold. Very few construction methods do all three.

This one is eight modules around a double-height glass hall, with the model on the floor, the sales desks on a mezzanine and a terrace on the roof. The modules are standard; the hall is a steel frame glazed on three sides; the two bolt together on site.

The reason to build it this way is time. The pavilion can be ordered, built and opened in 45 days while the main building is still in groundwork, and the modules can be re-used as offices or a site canteen when the sales job is done.

Where it is typically used

Property sales pavilionsModel hall, sales desks, a meeting room and a terrace for viewings.
Brand and product showroomsDouble-height hall, glazed on three sides, with a fit-out that can be changed seasonally.
Visitor and exhibition centresA permanent-looking building with a temporary planning consent.
Site reception and client suitesA project office that clients are happy to walk into.
02 / SPECIFICATIONS

Key specifications

Total area Approx. 120 m² over two levels
Modules 8 standard units + a glazed hall frame
Hall Double height, glazed on three elevations, 6 m clear
Mezzanine Steel frame with a timber deck, 40 m², reached by an internal stair
Terrace Roof deck with a glass balustrade, 35 m²
Facade Timber-look screen over the module joints, aluminium trim
Services WC pod, kitchenette, data and AV riser, 63 A three-phase
Comfort Split AC per zone, 100 mm wall and roof for a conditioned hall
Structure Module frames bolted to a hall frame; no welding on site
Loading 8 modules in 4 × 40HQ
Erection 10 days on site with a crane and a six-person crew
Options Lift, full-height glazing, landscape deck, PV roof, signage

Figures are for the standard configuration and change with the project. Values are design values; acceptance follows the contract technical agreement.

03 / WHAT IS INSIDE

What goes in the box

Installed, wired and tested before dispatch. On site the work is placement and external connections.

01Module ring

Eight standard units arranged around the hall, bolted to each other and to the hall frame.

02Hall frame

A steel portal frame carrying the double-height glazing and the roof over the hall.

03Glazed hall

Tempered units on three elevations, with a structural mullion at each corner.

04Mezzanine

A steel frame with a timber deck, fixed to the modules, not to the hall glazing.

05Facade screen

Aluminium battens in a timber-look finish, set 100 mm off the module face to hide the joints.

06Roof terrace

Deck on pedestals over the roof panel, with a glass balustrade and a drainage layer.

04 / MODELS

Which model to take

Model Area Layout Erection Best for
HSE-SHW-120 120 m² · 2 levels Hall + mezzanine + 4 rooms 10 days Property sales pavilion
HSE-SHW-80 80 m² · 2 levels Hall + 3 rooms 7 days Brand showroom, visitor centre
HSE-SHW-160 160 m² · 2 levels Hall + 8 rooms + terrace 14 days Client suite with a model apartment
HSE-SHW-40 40 m² · 1 level Single hall + office 3 days Site reception, pop-up showroom

Standard models are listed. Other capacities are built to order, with two to three weeks added to the standard lead time.

05 / TECHNICAL NOTES

A temporary building that has to look permanent

ENGINEERING NOTE

Hiding the module grid

Every container building shows its origins at the joints: a shadow line every 6 m, a bolt plate at each corner, a roof that steps. On a sales pavilion those lines are in every photograph of the project, so they have to be dealt with.

We set an aluminium batten screen 100 mm off the module face, running vertically at 150 mm centres. It hides the joints, gives the facade a texture that reads as timber at 10 m, and creates a ventilated cavity that keeps the sun off the panel. It costs about 8% of the shell and it is the difference between a pavilion and a site office.

Planning and re-use

Most pavilions are built on temporary consent, which means the building has to be removable and the site has to be restorable. Screw piles and bolted frames satisfy that; a slab does not.

When the sales job ends, the modules come apart and go back to work as offices, a canteen or staff accommodation. Clients who plan for that recover 40–60% of the cost, and it is worth designing the fit-out so the modules can be re-purposed without being stripped.

The joints are what give a container building away. The facade strategy is where the budget goes.

06 / SELECTION

When to use it, when not to

These come from projects rather than general advice. Match your case against them; it is more useful than reading the specification table.

You need to sell from the site before the building exists.

45 days from order to an open pavilion.

The consent is temporary.

Screw piles and bolted frames come out and the site is restored.

The pavilion has to look designed, not parked.

The facade screen and the glazed hall do that work.

You need a permanent building with a 50-year life.

This is a 15–20 year building; a steel frame is the right answer.

The budget is a site office budget.

A pavilion costs three to four times a fitted office per square metre.

07 / DELIVERY

From contract to the first key

Concept

Site, consent status, what is being sold and how many staff. Concept plan and budget back in a week.

Design

Module layout, hall frame, facade and fit-out on a coordinated drawing set.

Production

35 days for the modules and the hall frame, running in parallel.

Pre-assembly

The hall frame and two modules trial-assembled in the yard, with the facade mocked up.

Delivery

4 × 40HQ, sequenced so the hall frame lands first.

Erection

10 days: frame, modules, glazing, facade, mezzanine, terrace.

08 / GALLERY

On site and in detail

A two-storey pavilion with a timber-look screen facade and a planted forecourt
A two-storey pavilion with a timber-look screen facade and a planted forecourt
The same pavilion from the approach, showing the double-height hall and the terrace
The same pavilion from the approach, showing the double-height hall and the terrace
Facade detail: vertical battens over the module joints
Facade detail: vertical battens over the module joints
The module structure behind the facade, glazed and stacked
The module structure behind the facade, glazed and stacked

Some images are scheme illustrations and renders showing structure and layout. Final delivery follows the contract drawings.

09 / FAQ

What customers ask most

How is this different from a site office?

A site office is a box with a desk. A pavilion is a hall with a mezzanine, a terrace, a facade that hides the modules and a fit-out designed for clients. It costs three to four times as much per square metre and it does a different job.

Can it be dismantled and moved?

Yes, in about 10 days, and the modules can be re-used. That is the main reason clients choose it over a steel frame building on a slab.

Do I need planning permission?

In most jurisdictions a temporary structure needs consent, and the consent usually has a time limit. We supply drawings and a specification package for the application, and we can detail it as demountable to support that.

How long does it take?

45 days from order to opening, assuming the foundation is ready. Ten of those days are erection on site; the rest is production and shipping.

Can the hall be bigger?

Yes, up to 9 m clear span on the same portal frame. Beyond that the frame section changes and it stops being shippable in standard containers.

What happens to it after the sales job?

The modules come apart and go back to work: offices, a canteen, staff accommodation. Clients who plan the second use at design stage recover 40–60% of the cost.

Ask for a block plan for your site

Send the headcount, the shift pattern, the ground conditions and the climate. You get a block plan, a loading plan and a price, at no charge, revised until it works.

See the full house range

Product Details
gallery
RELATED PRODUCT
Card House Toilet
Container Toilet & Shower Block — Six Cubicles, One Service Wall
Card House 2Story
Two-Storey Container House — Stacked, Braced and Stair-Connected
Container accommodation unit seen from outside, white shell with full-height glazing and a timber deck
Container Accommodation Unit — Four-Bed Crew Room, Ready to Stack
40 ft combination container house with full-height glazing (catalogue crop)
40 ft Combination Container House — Two Rooms, One Shell
Contact us

Committed to providing customers with high-quality and reliable container solutions.