A chilled water plant in a box, next to the hall it cools
A data hall needed a dedicated chilled water plant with no plant room to put it in. The magnetic-bearing chillers, pumps, pipework, distribution and controls arrived as one commissioned station.
Cooling is the part of a data centre that arrives last
What the hall needed
The hall itself was straightforward. The problem was the plant: a chilled water system with magnetic-bearing machines, pumps, headers and controls, normally built into a plant room that the building programme has to deliver first.
On this site there was no plant room and no time to build one. The station also had to sit close to the hall, which turned acoustics and structure-borne vibration from a footnote into a design constraint.
What we built
A containerised station with the chillers, primary pumps, headers, distribution and the control system inside. Pipework is fabricated to the module, pressure-tested, and the whole plant is run at the factory against a load bank before it ships.
The enclosure is acoustically treated and the rotating plant is isolated at the base, so the station can stand beside an occupied building. On site it is a lift, a water connection and a power connection.
Three constraints that shaped the station

Acoustic lining and sealed doors so the station can sit next to the hall it serves. Distance is not available on a dense site.

Rotating plant on isolation mounts, pipework on flexible connections. Structure-borne noise travels further than airborne noise and is harder to fix later.

Sequencing, setpoints and alarms proven against a load bank at the factory, so the site test confirms rather than discovers.
From load calculation to first chilled water
What the station is specified to hold
Values describe the configuration as delivered. Cooling capacity and commercial terms are not disclosed.
The station, inside and out




The products this specification maps to
Published as an anonymised reference. The client is not named and the site location is given only to region level. Commercial values (contract sum, unit price) are withheld; the technical figures describe the configuration as delivered. Where a number has been rounded or scaled for confidentiality it is stated in the note above.
Send the cooling load and the part-load profile.
Tell us the supply and return temperatures, the space available and the noise limit at the boundary. We will come back with the station arrangement and the commissioning scope.